Product Details:
|
Type: | High Pressure Downhole Tester Valve Parts | Application: | Drill Stem Testing |
---|---|---|---|
Tool Size: | 5 Inch | Connection: | IF Box X Pin |
Working Pressure: | 105 Mpa | Standard: | NACE MR0175 |
Working Temperature: | Max. 450 OF | Working Condition: | Standard Service |
Highlight: | pressure safety valve,downhole valve |
Metering Cartridge Of Downhole Select Tester Valve DST Tools
Function of the metering cartridge in select tester valve
The metering cartridge is the key part of the select tester valve which is applied for the downhole testing service. The metering cartridge provides the area that the operating pressure acts over to open the valve. The metering cartridge has two parallel flow paths through it, Each path only allows fluid to move in a single direction. The first flow path contains a check valve. This path allows oil unrestricted flow into the upper oil chamber from lower oil chamber. The second path contains a pressure relief valve and a time-delay valve. This path only allows fluid to move into the lower oil chamber from upper oil chamber slowly when the pressure relief valve open.
The metering cartridge used in the Select Tester Valve is different from the one used in the LPR-N. The metering rate for this cartridge can be varied by changing the type of plugs installed in the OD of the metering cartridge housing. This feature will allow the tool to operate over a wider range of bottom hole conditions without disassembling the tool and changing the metering cartridge. The standard metering cartridge operating pressure range is 2 ksi to 14 ksi hydrostatic pressure.
Technical Parameter of Downhole Tester Valve
Size | OD (mm) | ID (mm) | Length (mm) | Working pressure (MPa) | Working temperature | Service circumstances |
3 7/8’’ | Ф99 | Ф45 | 7728 | 70 | -29℃~+150℃ | Includes of H2S |
5’’ | Ф127.5 | Ф57 | 10087 |
What can you get from Techcore Oil Tools?
* Drill stem testing tools for cased hole, open hole and slim hole manufactured by Techcore
Full bore retrievable packer, full bore retrievable circulating valve, full bore retrievable safety joint, downhole tester valve, select tester valve, LPR- N Valve, omni valve, multi-cycle circulating valve, hydraulic jar, vertical shock absorber, radial shock absorber, RD safety circulating valve, high pressure retrievable packer with bypass, CHAMP packer, IPO valve, tubing string test valve, sleeve type drain valve, rupture disk sampler, super safety valve with control panel, BOP safety valve for downhole operation and so on.
Strict quality control system
Techcore oil tools is certified by ISO, all the manufacture is strictly conformed with ISO system including Quality Control Management, Environmental Management and Occupational Health & Safety Management. For each downhole tools and each parts, we make the trace-ability from the raw material till the products. And any TPI inspection are available with us from SGS/BV/ TUV /DNV etc..
Continuous after sales service
Techcore provides the prompt after-sales service to our customers to guarantee your benefits. For the complete downhole tools, we provide the free training in our factory, and if you need the site instruction, we can appoint our technical engineer to your site for the training.
Welcome to contact us for more information about our tools and service!!
Contact Person: Mr. LEE
Tel: 0086 18161839623