|
Product Details:
|
| Tool Type: | APR DST Tools | Working Pressure: | 15000 Psi |
|---|---|---|---|
| Material: | Alloy Steel | Tool Size: | 5 Inch |
| Standard: | NACE MR0175 | Working Condition: | H2S Service Above 175oF |
| Application: | Oil Well Drill Stem Testing Operation | Connection: | CAS Box X Pin |
| High Light: | downhole valve,pressure safety valve |
||
Oil Well Downhle Master Valve High Pressure Tester Valve LPR - N Valve
Brief of LPR - N Tester valve
The LPR-N Tester Valve is a kind of downhole tester valve for the drill stem testing operation. The LPR-N Valve is full-opening annulus pressure-operated valve and acts as the downhole master valve and allows multiple closed-in pressures to be taken in cased holes where a full-opening test string is required.
Structure of LPR - N Tester valve
The LPR N Valve is composed of three basic sections:
Ball valve operation of LPR - N Tester valve
The ball valve section contains the ball valve and related mechanical components that rotate the ball.When the tool is activated, the ball is rotated to the open position, allowing the reservoir to flow into the test string. Depending on how the tool is assembled, it can be run in the hole in the closed or open position. If the tool is set up to run in the hole in the open position, the first time pressure is applied and released the tool will shift back into the normal operating mode. In the normal mode, the ball will open when annulus pressure is applied and will close when the pressure is released.
Specification of the LPR - N Tester valve
|
Nominal Tool Size in. |
OD in. (cm) |
ID in. (cm) |
Thread Connections |
Service Temperature* °F (°C) |
Length in. (cm) |
Tensile Rating** lb (kg) |
Working Pressure*** psi (bar) |
|---|---|---|---|---|---|---|---|
| 3.00 |
3.06 (7.77) |
1.12 (2.84) |
2 1/4 CAS |
450 (232) |
167.76 (426.11) |
160,000 (72 576) |
10,000 (689) |
| 3 7/8 |
3.90 (9.91) |
1.80 (4.57) |
2 7/8 CAS |
450 (232) |
199.88 (507.7) |
219,000 (99 338) |
10,000 (689) |
| 5.00 |
5.03 (12.78) |
2.25 (5.72) |
3 7/8 CAS |
450 (232) |
191.30 (485.90) |
367,448 (166 674) |
15,000 (1034) |
| 5.00 (SG) |
5.03 (12.78) |
2.28 (5.79) |
3 7/8 CAS |
450 (232) |
208.46 (529.49) |
405,581 (183 971) |
15,000 (1034) |
| 7.00 |
7. 00 (17.78) |
3.50 (8.89) |
5 1/4 CAS |
450 (232) |
194.16 (493.17) |
417,709 (189 473) |
10,000 (689) |
﹡HSE﹡Safety instructions of the Hydraulic Circulating Valve:
1. When running each pressure test, you must increase pressure gradually. When the pressure is up to 20MPa, hold on for one minute, then every 10MPa keep it for one minute until the rating pressure;
2. During doing the pressure test, the tool should be placed in the test pit and cover the protecting board on the pressure test plug.
3.During the whole process, make sure the entire test operator keep away from plug and joint which may lapse.
4.Test area should set isolation, others except operator not allowed to enter test area.
5.If there is anybody in the test area, it should set isolation, avoiding test production fly off the test area.
About Techcore Oil Tools
Techcore Oil Tools has the professional Reserch and Development (R&D) department with skilled engineers whom were committed to the design of downhole tools for more than ten years and Techcore is equiped with advance equipments to manufacture the oil downhole tools and its related parts in high quality.
Contact Person: Mr. LEE
Tel: 0086 18161839623
