|
Product Details:
|
| Application: | Drill Stem Testing Operation | Type: | Vertical Shock Absorber, Radial Shock Absorber |
|---|---|---|---|
| Working Pressure: | 15000 Psi | Standard: | NACE MR 0175 |
| Connection: | IF Box X Pin | Working Condition: | H2S Above 175oF |
| Material: | AISI Alloy Steel | Package: | Polywood Case |
| Highlight: | well testing tools,oil well drilling tools |
||
Vertical Shock Absorber Drill Stem Test Tools High Pressure 15000 PSI Service
Introduction of Vertical Shock Absorber
The Vertical Shock absorber is one of shock absorber used for drill stem testing operation to protect pressure-measuring equipment or other sensitive components in the workstring when shock loads transmitted through the workstring by firing of TCP guns. Two size of the vertical shock absorber are available to meet different well condition.
Specification of Vertical Shock Absorber
|
Size /in |
OD /mm |
ID /mm |
Working pressure /Mpa |
Service environment |
Working temerature |
Connection |
|
3 7/8 |
98.5 | 45 | 105 |
Mud, oil and Natural gas with H2S and acid |
Max 450 oF |
EUE IF |
|
5 |
127 | 57 |
Feature of the Vertical Shock Absorber
* Made of Alloy Steel or Inconel
* It is easy to install and mainten the vertical shock absorber
* Applied for slim hole and cased hole drill stem testing
Operation
The Vertical Shock Absorber is normally run always run between the gauge carrier and the tubing-conveyed perforating guns and below the casing packer.The Vertical Shock Absorber is recommended to be run in conjunction with a drag block assembly for effective shock absorption.
About Techcore Oil Tools
Techcore Oil Tools expertise in manufacture of the Drill Stem Testing Tools for more than Ten years, the professional Reserch and Development (R&D) department improves the advanced technology in design of the Drill stem testing tools for well testing service.
Techcore designs and chooses the raw material of DST tools according to the customers' oil well condition, and make all our effort to supply the cost effective well testing tools to satisfy the customer, and improve the test tools to meet the industry’s demand for ultra-high pressure and temperature downhole operation.
We approach every client’s enquiry with meticulous attention to technical specifications, and a high level of appreciation for their urgency.
Drill stem testing tools for cased hole, open hole and slim hole:
Full bore retrievable packer, full bore retrievable circulating valve, full bore retrievable safety joint, downhole tester valve, select tester valve, LPR- N Valve, omni valve, multi-cycle circulating valve, hydraulic jar, vertical shock absorber, radial shock absorber, RD safety circulating valve, high pressure retrievable packer with bypass, CHAMP packer, IPO valve, tubing string test valve, sleeve type drain valve, rupture disk sampler, super safety valve with control panel, BOP safety valve for downhole operation and so on.
Contact Person: Mr. LEE
Tel: 0086 18161839623
