|
Product Details:
|
| Tool Size: | 5 Inch | Working Pressure: | 15000 Psi |
|---|---|---|---|
| Material: | Alloy Steel | Connection: | CAS BxP |
| Standard: | NACE MR0175 | Working Condition: | H2S Service Above 175oF |
| Application: | Drill Stem Testing Operation | Type: | APR Tools |
| High Light: | well testing tools,oil well drilling tools |
||
Alloy Steel Well Testing Tools Oil Well Drilling Tools OMNI Circulating Valve
Introudction of DST OMNI Valve
The DST OMNI Circualting Valve is a sort of annulus pressure operated and reclosable circulating valve. Throughout the pressure operation, the OMNI Circulating Valve is repeatedly cycled up to a predetermined annulus pressure and then released.
The OMNI Circulating valve consists of four sections including nitrogen section, oil system, circulating valve, and ball valve, the structure and function is the similar with Halliburtun type.
The nitrogen section of the OMNI Circulating Valve contains the nitrogen gas that counter balances the hydrostatic and annulus pressures.The amount of nitrogen in the OMNI Circulating Valve depends on well hydrostatic and oil well temperature. This information must be known to properly prepare before the OMNI Circualting valve is run into the well.
Features and Benefits of the DST OMNI Valve
* The OMNI Valve permits passage of wireline tools through its full-opening bore
* This kind of circulating valve requires no pipe rotation to operate
* The OMNI Valve allows the pressure testing and fluid circulatiion in the oil well testing service.
* The OMNI Valve is a Multi-cycle circulating valve, and allows unlimited number of pressure cycles
Operation of the DST OMNI Valve
When the OMNI Circulating Valve is in the well test position, we can do the flow test in the oil well. In this test position, the circulating ports of the OMNI Valve are closed and the ball valve is opened. When the downhole drills stem test is closed, the OMNI valve is in the well test position during flow and shut in period, and the workstring can be pressure-tested in the blank position as the ball valve closes before the cicualting valve opens. When the circulating ports of the OMNI valve are open and the ball valve is closed, the fluid in the oil well can be pumped in either direction through the tool in the circulating position.
Technical parameter of DST OMNI Valve
| No | Specification | 5” |
| 1 | OD | 127.5mm |
| 2 | ID | 57mm |
| 3 | Length | 6555mm |
| 4 | Working pressure | 105Mpa |
| 5 | Ball valve Open Differential pressure | 35Mpa |
| 6 | Ball valve top and bottom differential pressure | 70Mpa |
| 7 | Internal Pressure strength | 146Mpa |
| 8 | External pressure strength | 136Mpa |
| 9 | Tensile strength | 2034KN |
| 10 | Torque strength | 31.6KN.m |
| 11 | Circulating Flow area | 2280mm2 |
| 12 | Service | H2S,NACE MR0175(>175oF) |
| 13 | Working temperature | -29℃～+204℃ |
| 14 | Connection thread | 3 7/8″CAS.B×P or 3 1/2″IF.B×P |
Well Testing Drill Stem Testing Tools OMNI Circualting Valve 5" -15000psi
Contact Person: Mr. LEE
Tel: 0086 18161839623
