|Appliction:||Well Testing||Type:||Rupture Disk Operated|
|Working Condition:||High Pressure And High Temperature||Working Temperature:||Max. To 450 OF|
|Working Pressure:||15000psi||Connection:||CAS Box X Pin|
well testing tools,
oil well drilling tools,
dst drill stem test
Drill Stem Testing(DST) Tools Dual Action Ball Valve, Rupture Disk operated 5"OD x 15000 PSI, 400F, 3 1/2" IF or 3 7/8" CAS
The Dual Action ball Valve is the annular Rupture disc controlled ball valve type tools, also called RD DAV, can be used as a tester valve or a safety valve to close the well under emergency condition. The RD-DAV can be run in hole in either the open or closed position, the tool can be operated by twice, so called as Dual action or dual shot valve. In the single cycle configuration, the RD-DAV can be used as a tubing string pressure test valve, or as a safety shut in valve in wells where a secondary downhole barrier is required. The Dual cycle configuration provides downhole tester valve with one shut in cycle for a pressure build up, and the ability to re-open for an additional flow period or well kill procedures.
On the other hand, to be as the downhole tester valve to crease well flow, the data collect can only be referenced, normally to get accurate data or parameters, third open and third close will be very necessary.
There are two rupture discs installed, one is for lower pressure Rupture disc and another is for higher pressure Rupture disc that selected base on filed application or testing procedures, the selection of rupture disc will be important to operate the tool.
Features and Benefits
Technical parameter of RD Dual Action Ball Valve
|Working Pressure-Long seat||105Mpa|
|Working Pressure-Short seat||70Mpa|
|Ball Valve upper Pressure-Long seat||70Mpa|
|Ball Valve upper Pressure-Short seat||35Mpa|
|Ball Valve Lower Pressure-Long seat||105Mpa|
|Ball Valve Lower Pressure-Short seat||70Mpa|
|Internal Pressure Strength||130.3Mpa|
|External Pressure Strength||121.2Mpa|
|Service||Mud,Crude Oil,Natural gas NACE MR0175,Above 175F|
|Connection Thread||3 1/2” IF BXP 3 7/8” CAS BXP|
Advantage of Techcore Oil Tools
Techcore Oil Tools expertise in manufacture of the downhole oil tools for more than Ten years, the professional Reserch and Development (R&D) department improves the advanced technology in design of the Drill stem testing tools for well testing service, coiled tubing tools for CT operation.
* Techcore insist on superior quality, strong packing & timely delivery.
* Third party inspection is available from SGS, BV, DNV etc.
* Techcore do the best to supply thoughtful and prompt after-sales service to guarantee for the
The drill stem testing tools are applied in cased hole, open hole and slim hole downhole operation, the DST tools not only used for well testing oepration, but also used for fracturing operation, well completion operation, well flow test operation, and tubing perforating oepraton.
The main DST tool string includes RTTS packer, full bore retrievable circulating valve, full bore retrievable safety joint, select tester valve, downhole tester valve, omni valve / multi-cycle circulating valve, hydraulic jar, radia shock absorber,Vertical shock absorber, RD safety circulating valve, high pressure retrievable packer with bypass, IPO valve, tubing string test valve, and so on.
Welcome to contact us for more information!
Contact Person: Lee