|
Product Details:
|
| Application: | Cased Hole Well Testing | Type: | Annulus Pressure Operate Tools |
|---|---|---|---|
| Tool Size: | 5" | Connection: | IF Pin X Box |
| Standard: | NACE MR0175 | Working Condition: | Standard Service |
| Material: | Alloy Steel | Usage Condistion: | HPHT Drill Stem Testing |
| High Light: | downhole valve,pressure safety valve |
||
RD Circulation Valve Select Tester Valve Alloy Steel For DST Operation
Introudction Select tester valve
The select tester valve is a part of drill stem testing working string, served as main downhole tester valve. This kind of tester valve is designed with the lock open feature and full bore design
The select tester valve includes four main sections: ball valve section, nitrogen section, upper hydraulic section and the metering section, the ball valve is operated by the annulus pressure
Specification of the downhole tester valve
| Tools: | Downhole Tester Valve |
| Application | Cased Hole Drill stem testing Operation |
| Tool Size: | 5 inch |
| Standard: | NACE MR0175 |
| Product model: | Select tester valve full bore type |
| Working pressure: | 10000psi ~ 15000psi |
| Service: | H2S, CO2 Above 175oF and Full H2S |
| Working condition: | High pressure high temperature (HPHT) |
| Package : | wood case |
Operating the Select Tester Valve With The RD Safety Circulating Valve
When running the Select Tester Valve with an RD Safety Circulating Valv in the same tool string operating, the selection of the rupture disk is important. It should be noted that rupture disk should be high enough to allow for the operation of the SELECT Tester Valve.
The pressure required to lock the tester valve open and re-activate it is 1,300 psi + the normal operating pressure, example:
Well Conditions - HYD = 5000 psi BHT = 225
Operating Pressure (from Table) = 987 psi
To lock the tool in the open position, the operating pressure is:
normal operating pressure + 1300 psi = 987 + 1300 = 2287 psi
The Rupture Disc Circulating Valve should be set 1000 psi above the maximum pressure used to operate the tester valve. In the example above the RD Valve should be set to operate at 3287psi above hydrostatic.
Assembly Instructions of the downhole tester valve
After a job the select tester valve should be completely disassembled and cleaned. Visually inspect all sealing surfaces and threaded connections for damage. Any damaged components found that would adversely effect the operation of the tool should be replaced.
Techcore oil tools
Techcore Oil Tools expertise in manufacture of the DST tools for more than Ten years, the professional Reserch and Development (R&D) department improves the advanced technology in design of the downhole oil tools for well testing service and well completion service.
* Techcore insist on superior quality, strong packing & timely delivery.
* Third party inspection is available from SGS, BV, DNV etc.
* Techcore do the best to supply thoughtful and prompt after-sales service to guarantee for the customers' benefits
* With 12 months guarantee of the Drill stem testing tools.
* Techcore insist on the traceability of each Drill stem testing tools and related DST parts
from the raw material to the finished products to meet on requirements of onshore and offshore
standards.
We approach every client’s enquiry with meticulous attention to technical specifications, and a high level of appreciation for their urgency.
Contact Person: Mr. LEE
Tel: 0086 18161839623
