|
Product Details:
|
| Tool Type: | Annulus Pressure Operate | Appliction: | Well Testing Service |
|---|---|---|---|
| Working Condition: | HPHT | Working Temperature: | Max. To 450 OF |
| Working Pressure: | 15000psi | Standard: | NACE MR0175 |
| Tool Size: | 5 Inch | Connection: | CAS Box X Pin |
| Highlight: | omni circulating valve,downhole safety valve |
||
5 Inch 15000 PSI RD Circulating Valve Cased Hole Drill Stem Test Tools
Introudction of RD Circulating Valve
The rupture disk circulating valve is operated by annulus pressure, and used for drill stem testing service. the annulus pressure made RD burst and the pressure goes into RD hole and push circulating mandrel forward, then open the circulating ports.
Feature of RD Circulating Valve Structure
The RD circulating valve consist of power section and circulating section:
1. The power section composed with a power mandrel case and rupture disk and the rupture disck is available for a wide range of pressure applications , that bursts at a predetermined pressure, then allowing annulus pressure to be applied to a differential area on the power mandrel.
2. The circulating sectio is a set of ports, and the circulating ports are initially sealed by the power mandrel. When the rupture disk bursts at a predetermined pressure, the power mandrel moves down, the ports are exposed, and permit communication between the annulus and DST workstring.
Operation
Before the Rupture Disk - RD circulating valve is used, the operating pressure must be calculated for selecting the proper rupture disk pressure rating. It require information including mud weight, bottom hole temperature, testing depth and maximum annulus pressure. When the rupture disk circulating valve is run with an annulus pressure-operated valve, the safety valve operating pressure should be kept 1,000 PSI above the operating pressure of the tester valve.
Technical parameter of Retrievable Circulating Valve
| No | Specification | 5” RD Circulating valve |
| 1 | O.D. | 127.5mm |
| 2 | Bore Diameter | 57mm |
| 3 | Length | 1220mm |
| 4 | Working pressure | 105Mpa |
| 5 | Internal pressure strength | 139Mpa |
| 6 | External pressure strength | 120Mpa |
| 7 | Tensile strength | 2139KN |
| 8 | Torque strength | 61KN.m |
| 9 | Service | H2S,NACE MR0175(>175oF) |
| 10 | Working temperature | -29oC+204oC |
| 11 | Connection thread | 3 7/8CAS. BXP or 3 1/2 IF.BXP |
Rupture Disk Circualting Valve Inner Seal Chart
Drill Stem Test Tools RD Circulating Valve , 5" Ruputure Disk Circulating Valve
Contact Person: Mr. LEE
Tel: 0086 18161839623
