|
Product Details:
|
| Application: | Open Hole Drill Stem Testing Service | Operation Type: | Internal Pressure Operated |
|---|---|---|---|
| Working Pressure: | 10000 Psi | Tool Size: | 5 Inch |
| Connection: | 3 1/2 CAS Box X Pin | Working Condition: | H2S Above 175oF |
| Material: | AISI Alloy Steel / Inconnel | Package: | Polywood Case |
| Highlight: | Internal Pressure Operated Circulating Valve,Open Hole Circulating Valve,AISI Well Testing Circulating Valve |
||
Internal Pressure Operated Circulating Valve Open Hole IPO for Well Testing
Introduction of IPO Circulating valve
The IPO circulating valve is the Internal Pressure Operated Circulating Valve used in open hole drill stem testing service. The IPO valve allows circulation through the work string before trip-out and serves as a drain during trip-out. It can be run in cased holes or open holes and maintains a full bore through the tool.
Feature and benefits
* The IPO valve requires no string manipulation to operate tool.
* The IPO Valve permits passage of wire line tools through full opening bore.
The IPO circulating valve is used in the following situations:
* When a full opening string is needed.
* When redundant backup to annulus pressure operated circulating valves is needed.
* When a limited amount of annulus-pump pressure is available to operate annulus pressure tools.
Specification of IPO Circulating valve
| No | Specification | 5” |
| 1 | OD | 127.5mm |
| 2 | ID | 57.2mm |
| 3 | Length(mm) | 680mm |
| 4 | Working pressure | 70Mpa |
| 5 | Tensile strength(yield) | 1672.9kN |
| 6 | Bursting pressure | 122.7Mpa |
| 7 | Collapse pressure | 129.1Mpa |
| 8 | Flow area | 1200mm2 |
| 9 | Service Environment | Mud, crude oil, natural gas with H2S,apply to NACE MR0175-2002 |
| 10 | End connections | 3 7/8 CAS. BXP, 3 1/2 IF BXP |
| 11 | Service Temperature | -20oF~+400oF |
About Techcore Oil Tools
Techcore Oil Tools has committed to the design of downhole tools for more than ten years.With the professional Research and Development (R&D) department and skilled engineers, Techcore improves the advanced technology in design and manufacture of the downhole oil tools .
Strict quality control system
Techcore oil tools is certified by ISO, all the manufacture is strictly conformed with ISO system including Quality Control Management, Environmental Management and Occupational Health & Safety Management. For each downhole tools and each parts, we make the trace-ability from the raw material till the products. And any TPI inspection are available with us from SGS/BV/ TUV /DNV etc..
Products scope
* RTTS Serires: Full bore retrievable packer, full bore retrievable circulating valve, full bore retrievable safety joint,
* Tester Valve: downhole tester valve, select tester valve, LPR- N Valve, Tubing String Tester Valve
* Circulating valve: omni valve, multi-cycle circulating valve, RD Circulating valve, RD safety Circulating Valve, Hydraulic Circulating Valve
* Other DST string tools: hydraulic jar, vertical shock absorber, radial shock absorber, RD safety circulating valve, high pressure retrievable packer with bypass, CHAMP packer, IPO valve, sleeve type drain valve, rupture disk sampler, super safety valve with control panel, BOP safety valve for downhole operation and so on.
Welcome to contact us for more information about our tools and service!
Contact Person: Mr. LEE
Tel: 0086 18161839623
