|Material:||AISI 4140 Alloy Steel||Working Pressure:||15000psi|
|Tool Size:||5"||Connection:||IF BXP|
|Standard:||NACE MR 0175||Type:||APR Tools|
|Application:||Well Testing DST||Working Condition:||High Pressure And Temperature|
downhole drilling tools,
downhole completion tools
Drill Stem Testing Multicycle Omni Circulating Valve 5" 15000 PSI APR Tools
Introduction of DST OMNI Valve
Multicycle circulating valve is a full opening, annulus pressure-operated re-closable circulating valve which can be open and closed many times. It is a sort of Repetitious valve and named OMNI valve. The multicycle circulating valve is operated by repeatedly cycling the annulus pressure up to a predetermined value and then releasing this pressure.
OMIN Vale is acceptable for the full-opening formation testing in cased hole, oil tube tradition perforation, tube string testing and cycle operation in the conjunction of perforation and full-opening formation testing. It overcomes the shortcomings of some other circulating valve, at a certain position, can use the annulus pressure to operate other tools many times and there is no influence upon the OMNI circulating valve. Because of the ability of opening and closing the well many times, it can carry on acidification and fracturing etc. other well stimulations in the end of the full-opening formation test. Using the valve can make the test program simple and reduce the reconnoitering cost greatly.
Features of OMNI Valve
* Full opening of OMNI valve permits the tool used for well testing, pressure testing and fluid circulation
* Allow unlimited number of pressure cycles.
Operation fo the OMNI Valve
OMNI circulating valve completes the function by increasing and releasing the annulus pressure .
According to the construction features it can be learned when increasing the annulus pressure, the piston push the hydraulic oil to move to the left, and the hydraulic oil push the check valve assemblies to move to the left until to the upper dead point, then the hydraulic oil pass the passageway and push the floating piston in the nitrogen chamber, thus the pressure is saved in the nitrogen chamber.
When releasing the pressure, because the pressure in nitrogen chamber is above the annulus
pressure ,the nitrogen pressure push the floating piston in the nitrogen chamber and then to hydraulic oil move to the right, the check valve assemblies to move to the right under pushing of hydraulic oil until
to the lower dead point, the hydraulic oil make the nitrogen pressure equal to the annulus pressure.
Technical parameter of OMNI Valve
|5||Ball valve Open Differential pressure||35Mpa|
|6||Ball valve top and bottom differential pressure||70Mpa|
|7||Internal Pressure strength||146Mpa|
|8||External pressure strength||136Mpa|
|11||Circulating Flow area||2280mm2|
|14||Connection thread||3 7/8″CAS.B×P or 3 1/2″IF.B×P|
Contact Person: Mr. LEE
Tel: 0086 18161839623