|
Product Details:
|
| Type: | Fail Safe Safety Valve | Application: | Well Testing Service |
|---|---|---|---|
| Tool Size: | 8" | Connection: | CAS. Box X Pin |
| Working Pressure: | 70 Mpa | Standard: | NACE MR0175 |
| Working Temperature: | Max. 450 OF | Working Condition: | Full H2S |
| Highlight: | downhole completion tools,oil well tools |
||
DST Super Safety Valve Downhole Oil Tools OD 8" 10000 PSI Inconel Steel
Overview of Super Safety Valve
The Super Safety Valve with working pressure up to 15000 psi is applied for the drill stem testing service in the cased hole, and serve as a fail safe safety Valve for well testing from a land or jack-up rig. Normally the super safety valve is located inside or below the Blow Out Preventer in order to control well flow.
Design Features of super safety valve
The Super Safety Valve is designed with a chemical injection port and controlled by two hydraulic lines The SSV is operated to close by spring force, but the tool has a nitrogen charge chamber to quicken the closing time, which make the super safety valve has the ability to cut wireline and coiled tubing without the addition of balance line pressure.
Operations of the Super safety valve
Typically, the super safety valve is run into the BOP where the valve controls the tubing area while the BOP pipe ram seals off the annulus.
The super safety valve is controlled by three hydraulic lines, one to each of the following:
• Control Chamber
• Balance Chamber (Nitrogen Chamber)
• Chemical Injection Port
Technical Parameter of Super Safety valve
| No | Specification | 8" |
| 1 | O.D. | 203.2mm |
| 2 | Bore Diameter | 76.5mm |
| 3 | Make Up Length | 2855.5mm |
| 4 | Working pressure | 103.5Mpa |
| 5 | Tensile strength | 6299KN |
| 6 | Torque strength | 137.6KN.m |
| 7 | Working Condition | H2S,NACE MR0175, Full H2S |
| 8 | Working temperature | -29oC+204oC |
| 9 | Material of the SSV body | AISI 4140 or Inonnel 718 |
Advantage of Techcore Oil Tools
Techcore Oil Tools expertise in design and manufacture of the Drill Stem Testing Tools and other downhole tools for more than Ten years, the professional Reserch and Development (R&D) department improves the advanced technology in design of the Drill stem testing tools for well testing service.
* Techcore insists on superior quality, strong packing & timely delivery.
* Third party inspection is available from SGS, BV, DNV etc.
* Techcore do the best to supply thoughtful and prompt after-sales service to guarantee for the
customers' benefits
* Techcore supply the cost effect products with 12 months guarantee
* Techcore insist on the traceability of each Drill stem testing tools and related DST parts from the raw
material to the finished products to meet on requirements of onshore and offshore standards.
Welcome to contact us for more information about our tools and service!!
Contact Person: Mr. LEE
Tel: 0086 18161839623
