|Usage:||Fluid Sampling In Oilfield||Application:||Oil Well Testing Service|
|Material:||Alloy Steel||Tool Size:||5 Inch|
|Standard:||NACE MR0175||Working Condition:||H2S Service Above 175oF|
|Working Pressure:||15000 Psi||Connection:||CAS Box X Pin|
dst drill stem test,
oil well drilling tools
RD Sampler DST Tools Rupture Disc Sampler for High Pressure Well Testing
Introduction of the RD samplers DST tools
The RD sampler is the sampling tools used in oil well drill stem testing service. The full name is rupture disk sampler with a full bore design. The RD samplers are operated by annulus pressure in cased hole, and mainly used in the full bore formation testing operation to get the formation fluid sample under downhole pressure state. The entire test tube string is kept full bore status before and after sampling and does not affect the conduct of subsequent operations.
Operation of the DST Tools RD sampler
The sampler is controlled by a pressure-operated rupture disk and has a sample mandrel with a built-in differential area. In order to catch a sample, the annulus pressure is increased to a predetermined level, then the rupture disk in the sampler breaks, and the mandrel traps the sample.
When the rupture disk breaks, the differential area of the sample mandrel is exposed to an air chamber on one side and hydrostatic pressure and applied annulus pressure on the other. This condition make the sample mandrel moving up and trapping the sample. When the sample mandrel reaches the top of its stroke, it is locked in place by a set of locking dogs.
Application of the RD sampler
Specification of the RD sampler
|5||Sampling chamber pressure||70Mpa|
|6||Sampling chamber volume||1200cc|
|9||Connection thread||3 7/8CAS. BXP or 3 1/2 IF.BXP|
Advantage of Techcore Oil Tools
Techcore Oil Tools expertise in manufacture of the Drill Stem Testing Tools for more than Ten years, the professional Reserch and Development (R&D) department improves the advanced technology in design of the Drill stem testing tools for well testing service.
Techcore designs and chooses the raw material of DST tools according to the customers' oil well condition, and make all our effort to supply the cost effective well testing tools to satisfy the customer, and improve the test tools to meet the industry’s demand for ultra-high pressure and temperature downhole operation.
* Drill stem testing tools for cased hole, open hole and slim hole:
Full bore retrievable packer, full bore retrievable circulating valve, full bore retrievable safety joint, downhole tester valve, select tester valve, LPR- N Valve, omni valve, multi-cycle circulating valve, hydraulic jar, vertical shock absorber, radial shock absorber, RD safety circulating valve, high pressure retrievable packer with bypass, CHAMP packer, IPO valve, tubing string test valve, sleeve type drain valve, rupture disk sampler, super safety valve with control panel, BOP safety valve for downhole operation and so on.
Contact Person: Lee