|
Product Details:
|
| Type: | Multi-Flow Evaluator / MFE | Usage: | Open Hole Drill Stem Testing |
|---|---|---|---|
| Working Pressure: | 10000 Psi | Tool Size: | 5 Inch |
| Connection: | EUE Box X Pin | Working Condition: | H2S Above 175oF |
| Material: | AISI Alloy Steel | Standard: | NACE MR 0175 |
| High Light: | dst tool,dst well test |
||
MFE By Pass Valve Open Hole DST Well Test Multi Flow Evaluator 10000 PSI
Brief of MFE By-Pass Valve
The MFE By-Pass Valve is Multi-Flow Evaluator applied for the open hole drill stem testing operation.Th MFE serves as a means to by-pass fluid through the packer when tight places are encountered while going in and coming out of the hole, and to equalize the pressure across the packer after a test is complete.
Structure of the MFE By-Pass Valve
The MFE By-Pass Valve are composed of the Main By-Pass, Auxiliary By-Pass and Metering Valve.
The MFE By-Pass Valve, like the Multi-Flow Evaluator is operated by up and down motion. When weight is applied and opened with time delay, the main by-pass ports of the MFE valve are closed quicklly The drill stem weight will be removed and tension applied. A pull of 20,000 Ibs. Above the free point for 1 to 2 minutes should be exerted on the MFE By-Pass to open it after a test. This time delay gives ample safety factor to insure the operator that the MFE is fully extended when going from the open to shut-in position.
The oil in the Valve Housing is by-pass between the valve and Upper Mandrel on the down stroke. For this reason, the main by-pass ports may be closed while going in the hole if it was necessary to spud through tight spots. Therefore, to by-pass well fluid while going in the hole under all conditions an Auxiliary By-Pass is provided.
Specification of Open Hole MFE By-Pass Valve
| OD | ID | Working pressure | Service | Sampler capacity | Thread Connections |
| 3 3/4” | 3/4” | 15000psi | Open hole testing | 1200CC | API Standard thread |
About Techcore Oil Tools
* Techcore insist on superior quality, strong packing & timely delivery.
* Third party inspection is available from SGS, BV, DNV etc.
* Techcore do the best to supply thoughtful and prompt after-sales service to guarantee for the
customers' benefits
* Techcore supply the cost effect products with 12 months guarantee
* Techcore insist on the traceability of each Drill stem testing tools and related DST parts from the
raw material to the finished products to meet on requirements of onshore and offshore standards.
Welcome to contact us for more information about our tools and service!
Contact Person: Mr. LEE
Tel: 0086 18161839623
