|Application:||Open Hole DST||Type:||Open Hole Tester Valve|
|Working Pressure:||15000 Psi||Tool Size:||3 3/4 Inch|
|Connection:||IF Box X Pin||Working Condition:||H2S Above 175oF|
|Material:||AISI Alloy Steel||Package:||Polywood Case|
dst well test
High Pressure Open Hole DST Hydrospring Tester AISI Alloy Steel Material
Introduction of DST Hydrospring Tester
The Hydro spring tester was a reliable and field-proven downhole master valve which is used in open hole drill stem testing operation.. The hydro spring tester is a combination tester valve and bypas and
operated by vertical movement of the drillpipe, the weight of the pipe effectively opens the tester and sets the packer. Raising the drill pipe closes the tester.
Specification of DST Hydrospring Tester
|OD||ID||Working pressure||Service||Sampler capacity|
Features of DST Hydrospring Tester
Operation of DST Hydrospring Tester
When positioning the tester valve for opening, it will record initial hydrostatic mud weight clearly on the pressure chart during the time interval . The hydrospring tester with an indexing J-slot, does not have a built-in bypass. If bypass is desired, the LOC bypass can be used. Repeated opening and closing of the tester valve for closed-in and flow periods is done by reciprocating the pipe. The indexing J-slot will automatically index so when every alternative time weight is set down, the tester valve will remain closed
About Techcore Oil Tools
Techcore Oil Tools expertise in manufacture of the Drill Stem Testing Tools for more than Ten years, the professional Reserch and Development (R&D) department improves the advanced technology in design of the Drill stem testing tools for well testing service.
Techcore designs and chooses the raw material of DST tools according to the customers' oil well condition, and make all our effort to supply the cost effective well testing tools to satisfy the customer, and improve the test tools to meet the industry’s demand for ultra-high pressure and temperature downhole operation.
* Techcore insist on superior quality, strong packing & timely delivery.
* Third party inspection is available from SGS, BV, DNV etc.
* Techcore do the best to supply thoughtful and prompt after-sales service to guarantee for the
* Techcore supply the cost effect products with 12 months guarantee
* Techcore insist on the traceability of each Drill stem testing tools and related DST parts
from the raw material to the finished products to meet on requirements of onshore and offshore standards.
We approach every client’s enquiry with meticulous attention to technical specifications, and a high level of appreciation for their urgency.
Welcome to contact us for more information about our tools and service!
Contact Person: Lee