|
Product Details:
|
| Type: | Mechanical Setting Retrievable Packer | Working Pressure: | 10000 PSI |
|---|---|---|---|
| Working Condition: | H2S Service Above 175oF / Full H2S | Application: | Drill Stem Testing Operation |
| Standard: | NACE MR0175 | Casing Size: | 7 Inch |
| Material: | Alloy Steel / Inconnel | Usage: | Cased Hole Well Testing |
| Model: | APR Tools | Connection: | IF Box X Pin |
| High Light: | High Pressure Retrievable Packer,7″ Retrievable Packer,Cased Hole Well Retrievable Packer |
||
7″RTTS PACKER 23-29# 10K PSI HIGH PRESSURE RETRIEVABLE PACKER
The Full Bore Retrievable Packers are the Test Packer that is a full opening, hookwall type packer which can segregate bidirectional pressure designed for use in drill stem testing, well treating, and squeeze cementing operations. A Packer is essential tool to run drill stem testing for cased hole to isolate and seal the downhole formation.
Before the retrievable packer is run into the well, it should be hung up, shift the drag block sleeve high and lower for may times, check whether the mechanical slip moves flexibly.When starting the RTTS packer into the hole, locking open the circulating valve. Place J-slot in the drag lock(or drag spring) sleeve in the locked position. The slip should be in the shrinkage state.During running into the hole, slippage will tend to set slips and close the circulating valve. To reopen circulating valve when it has inadvertently been closed. you must pick up the tubing and turn to right, then picks the tubing up to the position, which the circulating valve is open. Turn tubing to left to the locking open position. Take care not back off tubing.
Structure of the RTTS Packer:
• J-slot mechanism
• mechanical slips
• packer elements
• hydraulic slips
• bypass
Features and Benefits of RTTS packer
* The RTTS packer is a hookwall-type retrievable packer
* The RTTS PACKER can be used in highly deviated wells in HPHT working condition.
* The element packer is made of 90DURO VITON
Technical parameter of 7" RTTS packer
| Packer Element OD | 144.8mm |
| Top Shoe OD | 146.1mm |
| ID | 62mm |
| Length | 1598mm |
| Packer Element Diff. Pressure | 70Mpa |
| Tensile Strength | 805KN |
| Internal Pressure Strength | 98Mpa |
| External Pressure Strength | 92Mpa |
| Torque Strength | 14.5KN.M |
| Working Temperature | -29oC~180oC |
| Casing Range | 7” 23-29lb/ft |
| Service | H2S NACE MR0175(Above 175F) |
| Connection Thread | 3 1/2” IF Box-Pin or Request |
Advantage of Techcore Oil Tools
Techcore Oil Tools expertise in manufacture of the Drill Stem Testing Tools for more than Ten years, the professional Reserch and Development (R&D) department improves the advanced technology in design of the Drill stem testing tools for well testing service.
Techcore designs and chooses the raw material of DST tools according to the customers' oil well condition, and make all our effort to supply the cost effective well testing tools to satisfy the customer, and improve the test tools to meet the industry’s demand for ultra-high pressure and temperature downhole operation.
* Drill stem testing tools are available for cased hole, open hole and slim hole including:
Full bore retrievable packer, full bore retrievable circulating valve, full bore retrievable safety joint, downhole tester valve, select tester valve, LPR- N Valve, omni valve, multi-cycle circulating valve, hydraulic jar, vertical shock absorber, radial shock absorber, RD safety circulating valve, high pressure retrievable packer with bypass, CHAMP packer, IPO valve, tubing string test valve, sleeve type drain valve, rupture disk sampler, super safety valve with control panel, BOP safety valve for downhole operation and so on.
Welcome to contact us for more information!
Contact Person: Mr. LEE
Tel: 0086 18161839623
